How to Fix PXE1410CDM-G003 Inconsistent Performance

How to Fix PXE1410CDM-G003 Inconsistent Performance

What is PXE1410CDM-G003 Error?

The PXE1410CDM-G003 error generally occurs when a computer is having trouble booting up due to inconsistent performance issues related to the PXE (Preboot Execution Environment). This issue is often seen in systems that are set to boot from a network, and the error suggests problems related to the network boot process or the hardware configuration. PXE is commonly used for network-based installations or booting when the system’s local storage is not available.

Causes of PXE1410CDM-G003 Inconsistent Performance

Network Boot Configuration Issues The PXE boot error could stem from incorrect settings in the system’s BIOS or UEFI configuration. The system may be trying to boot from the network (PXE) instead of from the local drive, which could cause performance inconsistencies.

Faulty Network Cable or Network Configuration A physical issue with the network cable or a misconfigured network connection can also lead to problems when trying to establish a network boot. This is especially important if the computer relies on a network server for booting or for accessing files.

Hard Drive or Storage Device Failures If there is an issue with the hard drive or SSD (Solid State Drive) in the system, the computer may not be able to boot properly from the local storage. This could result in attempts to fall back on PXE boot, even if it's not intended.

Corrupt or Missing Boot Files If the boot files required to start the system from the local storage are missing or corrupted, the system might attempt to boot over the network, leading to inconsistencies in performance.

Outdated or Incorrect BIOS Settings An outdated BIOS version or misconfigured boot order in the system BIOS/UEFI could be preventing the system from correctly detecting and booting from the local drive, causing the computer to rely on PXE boot instead.

Step-by-Step Solutions to Fix PXE1410CDM-G003 Inconsistent Performance Step 1: Check BIOS/UEFI Boot Order

The first thing to do is check the system's boot order settings to ensure that the hard drive or SSD is the primary boot device.

Restart the computer and enter BIOS/UEFI Usually, pressing the Del or F2 key during startup takes you to the BIOS settings. Navigate to the Boot Order or Boot Priority menu Ensure that the hard drive (or SSD) is listed first in the boot order. The network (PXE) should be lower in the list. Save and Exit After adjusting the settings, save the changes and exit the BIOS. This should prevent the system from attempting a network boot when it shouldn’t. Step 2: Check Network Configuration

If you rely on a network for booting, ensure that the network connection is stable and properly configured.

Check the physical network connection Ensure the network cable is properly plugged in. If possible, try using a different network cable or port. Verify the DHCP Server Ensure that your DHCP server (which assigns IP addresses for network booting) is functioning properly. You can verify this by checking the server settings or trying to boot another device from the same network. Test with a different network If possible, test booting the system from a different network to rule out issues related to your current network setup. Step 3: Inspect and Test Hard Drive

If the issue persists, it’s a good idea to check the hard drive for any potential failures.

Check the Hard Drive for Errors Use a tool like Windows Check Disk (chkdsk) or third-party utilities to scan for and repair any errors on your hard drive. Test Booting from Another Device If you have access to another computer or bootable USB drive, try booting from that to see if the issue is related to the primary hard drive. Consider Replacing the Hard Drive If the hard drive is failing, you may need to replace it. Backup your data as soon as possible before attempting any repairs. Step 4: Reinstall Boot Files

If the boot files are missing or corrupted, you might need to repair or reinstall them.

Boot from a Windows Installation Media Create a bootable USB drive with Windows installation media and boot from it. Repair Startup Files Once booted from the USB drive, choose the "Repair your computer" option. From the advanced options, select “Startup Repair” to fix any corrupted or missing boot files automatically. Step 5: Update BIOS/UEFI Firmware

An outdated BIOS could be causing the system to fail in recognizing the boot drive properly.

Go to the manufacturer’s website Find the latest BIOS update for your motherboard. Follow the instructions Carefully follow the manufacturer's instructions for updating your BIOS. This process typically involves downloading the update file, placing it on a USB drive, and booting into BIOS to apply the update. Reboot the system After the update, restart the computer and check if the issue persists. Step 6: Disable PXE Boot (if not needed)

If you don’t need PXE booting, disable it completely to avoid further confusion.

Go back to BIOS/UEFI settings Find the PXE boot option under boot settings or network settings. Disable PXE Boot Disable PXE boot so the system doesn’t try to boot from the network by default. Save and exit After saving the changes, restart your computer and check if the error is resolved. Final Thoughts

If the PXE1410CDM-G003 error persists after following these troubleshooting steps, there may be a deeper hardware issue at play, such as motherboard failure or network card malfunction. At that point, it may be necessary to consult a professional technician to diagnose and repair the issue.

By following these steps, you should be able to resolve the inconsistent performance related to the PXE1410CDM-G003 error, whether the cause is a configuration issue, hardware failure, or corrupted boot files.